since 1994 © Hangtechnika Kft.

6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm
6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm
22.47 € excl. VAT

6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm

6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm
6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm
6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm
6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm
Shipping within (if available from supplier)
4-5 working days
Manufacturer
GRS
Orderable
22.47 € excl. VAT
Details

The GRS 6PT-8 6-1/2” professional paper cone woofer will deliver high output midbass and midrange response without breaking the bank. Packed with features like a 1.6” voice coil, inductance reducing copper cap, under spider venting, and gap vents; this driver is built for high performance, low distortion, and incredible reliability. Whether you need a drop-in replacement for a damaged loudspeaker or you are designing a high output 2 or 3-way system, the 6PT-8 is the perfect driver for budget builds.

 

Highlights

  • Lightweight damped paper cone allows high efficiency with minimal resonance
  • Smooth on and off axis response for use in high output 2 or 3-way designs
  • Extensive venting keeps cool air flowing across the voice coil to minimize power compression
  • Inductance lowering copper cap reduces distortion and extends high frequency response
  • Spring-loaded push-button terminals makes wire connections quick and easy
  • Foam front gasket ensures an airtight seal for rear mount installations

 

Product details

GRS 6PT-8 6-1/2" Paper Cone Professional Midbass Woofer 8 Ohm

 

Engineered for high output with smooth frequency response, the 6PT-8 6-1/2” professional woofer is ideal for use in systems built to provide impressive SPL. Packed with features you would expect from much more expensive drivers, the 6PT-8 is built for low distortion and reliability even when pushed to its limit. The lightweight reinforced paper cone has excellent damping properties, minimizing unwanted resonances, and the ribbed surface controls cone breakup to ensure smooth response all the way up to 3,000 Hz. Driving the cone is a 1.6” diameter dual-layer voice coil that is wound on a heat resistant polyimide former to handle up to 100 watt RMS. Extensive venting through frame, pole piece, and magnetic gap cools the voice coil to prevent thermal runaway and lower power compression during long sessions at high power. With a copper cap on the pole piece keeping inductance under control, you can ensure that the 6PT-8 will provide low distortion throughout its useable bandwidth. Whether you need a drop-in replacement for a worn-out speaker, or are designing high output 2 or 3-way system, the 6PT-8 is the ideal choice if you want high output and natural response without spending a fortune.

 

Article number6PT-8
EAN0848864066790
Nominal Diameter6-1/2"
Power Handling (RMS)100 Watts
Power Handling (max)200 Watts
Impedance (Z)8 Ohms
Sensitivity (SPL at 1m / 2.83V)92 dB
Frequency Response55 to 11,000Hz
DC Resistance (Re)7.4Ω
Voice Coil Inductance (Le)1.1mH
Resonant Frequency (Fs)94 Hz
Mechanical Q (Qms)4.74
Electromagnetic Q (Qes)0.85
Total Q (Qts)0.72
Diaphragm Mass Inc. Airload (Mms)8g
Mechanical Compliance of Suspension (Cms)0.36mm/N
Surface Area of Cone (Sd)136.6cm²
BL Product (BL)6.4T·m
Compliance Equivalent Volume (Vas)0.335ft³
Maximum Linear Excursion (Xmax)4.2 mm
Cone / Diaphragm MaterialPaper / Glass Fiber
Surround MaterialCloth
Voice Coil Wire MaterialCopper
Voice Coil FormerKapton® / Polyimide
Basket / Frame MaterialSteel
Overall Outside Diameter6.5"
Overall Depth3"
Baffle Cutout Diameter5.8"
Bolt Circle Diameter6.14
# Mounting Holes4
Sealed Volume0.5ft³
Sealed F3108Hz
Vented Volume1.1ft³
Vented F357Hz
Info
Article No.
GRS-6PT-8
Opinions
Be the first to review this product!